Discount SouthWire Company 13055923 12/2WG UF Wire 100-Foot

Buy SouthWire Company 13055923 12/2WG UF Wire 100-Foot

SouthWire Company 13055923 12/2WG UF Wire 100-Foot Product Description:

• 12/2WG UF Wire 100 Foot Roll
• Approved for direct burial
• UL Approved
• Made in the USA
• Uncoated copper conductors

Product Description

100' 12/2 Underground Feeder Cable With Ground, Plastic Jacketed, Copper, Cut Lengths.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Excellent wire for underground use
By Janet L. Thurman
I purchased this wire because I am installing a lamp post light at the end of our driveway. This is a good, quality wire to use for this purpose so I do not have to run a conduit.

3 of 4 people found the following review helpful.
Good quality wire,,,CHEAPER than others
By starman
I used this wire to run out to my shed, then to outlets in there plus buried some for outside lighting, VERY happy overall. Twists good, bares well and cost less from the Acehardwareoutlet I got it from, THRU THE GREAT FOLKS AT AMAZON.COM !!I keep thanking you guys.....when will it end....Rick in WI

2 of 3 people found the following review helpful.
Terrible Service and Over Priced Shipping
By not_smarter_than_a_5th_grader
I ordered this item with a bulk purchase order over $1k. I later noticed the shipping on this item which made its cost highly over priced. I contacted the seller the day it was to be shipped and cancelled the order. He did not cancel the order and shipped it. He then sent me a notice to ship it back for a refund and I had to pay for the return shipping.DO NOT PURCHASE FROM SOUTHWIRE COMPANY! HE GETS YOU WITH THE SHIPPING GOING AND COMING.

See all 6 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Comparisons for Xcelite® Hs-6-18 -

Buy Xcelite® Hs-6-18 -

Xcelite® Hs-6-18 - Product Description:

• 10-PIECE SAE FULL HOLLOW SHAFT NUTDRIVER KIT IN YE

Product Description

10-PIECE SAE FULL HOLLOW SHAFT NUTDRIVER KIT IN YE

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Hollow shaft; very convenient use over bolts
By acwitko
Excellent case. Clasp will not break. Write your name with broad tip magic marker all over case for security. Selection includes two larger nut drivers (HS-16, HS-18) than often included in such kits.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buying The Return of the King LEGOLAS PIPPIN MERRY ARAGORN GANDALF ATTACK TROLL Action Figure Final Battle of Middle-earth Gift Set

Buy The Return of the King LEGOLAS PIPPIN MERRY ARAGORN GANDALF ATTACK TROLL Action Figure Final Battle of Middle-earth Gift Set

The Return of the King LEGOLAS PIPPIN MERRY ARAGORN GANDALF ATTACK TROLL Action Figure Final Battle of Middle-earth Gift Set Product Description:

• Part of the 6 inches tall Lord of the Rings action figure line.
• Lord of the Rings The Return of the King Final Battle of Middle-earth Gift Set.
• Set includes; Legolas, Pippin in Armor, Merry in Armor, Attack Troll, Aragorn and Gandalf the White. All figures include weapons.
• Exclusive Attack Troll only available in this set, Attack troll 11 inches tall.
• Made by ToyBiz in 2005 and long out of production.

Product Description

In the final days of Sauron's campaign against the free realm of Gondor the Dark Lord unleashes all manner of terrible beasts and foul servants of evil to reap his ruin upon his enemies. Clad in heavy armour and trained for war, among his most fearsome troops are the great Battle Trolls from the mountains of Mordor. These towering brutes are far stronger than any Man and their thick hide and plated armour renders them near impervious to any harm.

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
A Little Boys Dream Toy!
By Mom2Many
I bought this for my son. I wasn't for sure about paying the price for the toy. Then when it came in the mail I was pleased with the sizes and detail of the whole set! The troll is huge! My son recived this at Christmas and has been enjoying it since. Its well made and holds up well during playtime. Well worth the money I put in it, also plan on adding more to his collection!

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

For Sale Erem 595T 4 1/4 Diagonal Semi-Flush Cut Magic Carbide Cutter

Buy Erem 595T 4 1/4 Diagonal Semi-Flush Cut Magic Carbide Cutter

Erem 595T 4 1/4 Diagonal Semi-Flush Cut Magic Carbide Cutter Product Description:

• Full Tapered head with tungsten carbide blades
• For hard wire up to .020"
• The jaws of the cutter have straight edges and taper to a point
• This head shape allows access to difficult to reach areas but reduces the cutting capacity in comparison to the same size oval head cutter

Product Description

Hard wire, stainless steel wire, material 1.4301, tensile strength 1800 Mpa. Medium-hard wire, stainless steel wire, material 1.4301, tensile strength 800 Mpa. Soft wire, copper, aluminium, tensile strength 250 MPa. 0.02" Cutting Diameter. 0.453" Head Width. 0.256" Head Thickness.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Quality Cutter
By Rick
I chose this cutter because I needed it for biomedical research, cutting electrodes with precision. Smooth and accurate cut everytime. With this cutter costing $130 or so, it better be good, and it was. I'm just glad I didn't pay for it.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Prices for SouthWire 63946823 14/3WG NMB Wire 100-Foot

Buy SouthWire 63946823 14/3WG NMB Wire 100-Foot

SouthWire 63946823 14/3WG NMB Wire 100-Foot Product Description:

• 14/3WG NMB Wire 100 Foot Roll
• Above ground household use
• UL Approved
• Made in the USA
• Uncoated copper conductors

Product Description

Cut coil of type NM B cable is designed specifically for use in residential and commercial wiring of branch circuits. Installation above ground and in dry locations only. Approved for service to 600V. PVC jacket and PVC insulated, nylon jacketed conductors. Flame retardant and crush resistant. UL listed.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
wire
By Mike Matejov
It's hard to screw up this item. I would be more than shocked if it was not perfect. thank you

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Prices PanaVise 507 Flat Ribbon Cable Cutter for 506

Buy PanaVise 507 Flat Ribbon Cable Cutter for 506

PanaVise 507 Flat Ribbon Cable Cutter for 506 Product Description:

• Accommodates up to 68-pin conductor cable
• More efficient than hand scissors; won't pull inner wires
• Easy to use and operate, slips into the 502 PanaPress with the 506 Retrofit Kit
• Accommodates ribbon cable up to 3.21875-Inch (81.8mm) wide and up to 14-gauge thick
• Limited Lifetime Warranty!

Product Description

PanaVise is a major manufacture of Vises and Work Holding Tools. PanaVise's Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise Products are covered by a Limited Lifetime Warranty! Introducing the Panavise 507 FLAT RIBBON CABLE CUTTER for 506, ACCESSORIES FOR USE WITH AN IDC ASSEMBLY PRESS. Perfect right angle cuts, every time! Accommodates up to 68-pin conductor cable. More efficient than hand scissors; won't pull inner wires. Easy to use and operate, slips into the 502 PanaPress with the 506 Retrofit Kit. Spring-loaded blade arm returns quickly to original position. Accommodates ribbon cable up to 3.21875-Inch (81.8mm) wide and up to 14-gauge thick. Limited Lifetime Warranty!

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Industry standard tool works exactly as intended
By Danam0
This is an attachment for use with the Panavise 506 IDC cable crimper system. It makes perfectly straight and clean cuts in flat ribbon cable. I also use it for cutting heat shrink to consistent lengths with a measuring stop attachment which I made for the the Panavise.The blade is robust and I've had them last for years of frequent use before needing replacement.If you are a professional making IDC cables on an industrial scale, or a electronics hobbyist who wants to be a perfectionist, this is the way to do it.The only step up from here is to spend many thousands of dollars on specialized automated machinery. The Panavise with this cutter attachment is the industry standard for hand-made IDC ribbon cable production.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

For Sale Online SouthWire 63948422 10/3WG NMB Wire 50-Foot

Buy SouthWire 63948422 10/3WG NMB Wire 50-Foot

SouthWire 63948422 10/3WG NMB Wire 50-Foot Product Description:

• 10/3WG NMB Wire 50 Foot Roll
• Above ground household use
• UL Approved
• Made in the USA
• Uncoated copper conductors

Product Description

Cut coil of type NM B cable is designed specifically for use in residential and commercial wiring of branch circuits. Installation above ground and in dry locations only. Approved for service to 600V. PVC jacket and PVC insulated, nylon jacketed conductors. Flame retardant and crush resistant. UL listed.

Customer Reviews

Most helpful customer reviews

5 of 5 people found the following review helpful.
High quality wire, easy to pull
By S. Lionel
In the aftermath of the October 2011 snowstorm here in New England, many products associated with generators are hard to find, especially reasonable lengths of 10-3 wire. This is the kind of wire most often used for connecting portable generators to transfer switches. I kept haunting my local stores looking for a 50-foot length, but the shelves were empty for weeks. So finally I ordered this spool, and the price was better, even after shipping, than what local stores would charge.The wire has a bright orange jacket and is easy to pull through narrow spaces. The jacket and conductors are easy to strip and appear to be of good quality.

1 of 1 people found the following review helpful.
Great
By AD
These conductors brought a decent volume of electrons from one place to another at close to the speed of light.

1 of 1 people found the following review helpful.
JUST WHAT I NEEDED
By JUST-JIM
Excellent item. Just what I needed to install a transfer switchwith the outside power inlet box. Amazons price was $20+ cheaperthan the "Blue Box Store" for the same brand and footage.

See all 7 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Online BK Precision 390A High Performance Test Bench Digital Multimeter with Protective Rubberized Case and USB interface, Auto ranging, 400 µA, 4 mA, 40 mA, 400 mA, 20 A Current Range, DCV 0.1% Basic Accuracy

Buy BK Precision 390A High Performance Test Bench Digital Multimeter with Protective Rubberized Case and USB interface, Auto ranging, 400 µA, 4 mA, 40 mA, 400 mA, 20 A Current Range, DCV 0.1% Basic Accuracy

BK Precision 390A High Performance Test Bench Digital Multimeter with Protective Rubberized Case and USB interface, Auto ranging, 400 µA, 4 mA, 40 mA, 400 mA, 20 A Current Range, DCV 0.1% Basic Accuracy Product Description:

• Digital multimeter measures current, voltage, resistance, capacitance, frequency, and temperature
• Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has an undistorted waveform
• Includes K-type thermocouple probe for taking temperature measurements
• Audible continuity sensor confirms a circuit conducts electricity, and diode test detects proper functioning of a circuit's diodes
• Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category III installations up to 1,000V

Product Description

The BK Precision 390A digital multimeter (also known as a multitester) is an average-sensing, auto-ranging meter for measuring current, voltage, resistance, capacitance, frequency, and temperature in electrical testing applications. The meter comes with a set of detachable test leads. A K-type thermocouple probe is included for taking temperature measurements. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuit’s diodes. The LCD shows readings in digits and on a 41-segment bar graph. It displays the present measurement or the highest or lowest reading in a session, for tracking sudden changes in readings. The relative mode stores a reading in memory to use as a zero point for subsequent readings so that multiple readings can be compared. The peak maximum or minimum function records instantaneous peak values for current and voltage. The microamp function identifies current changes in flame detector applications. A hold function keeps a reading on the display, even after the meter has been disconnected. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. A USB data port connects the meter to a computer (USB cable and software are included). The unit automatically turns off after 30 minutes of nonuse to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter's body is made of molded rubber, which helps protect it against damage from falls, impacts, and abrasion.

This average-sensing , or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The LCD has a 4,000-count resolution, meaning it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category III installations up to 1,000V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply).

Specifications

Maximum alternating current (AC) input	20 amp
Maximum direct current (DC) input	20 amp
Maximum AC voltage input	750 volts (V)
Maximum DC voltage input	1,000V
Maximum resistance detected	40 megaohms
Maximum capacitance detected	40 millifarads (mF)
Maximum frequency detected	40 megahertz (MHz)
Temperature measurement range	-50 to 1300 degrees C (-58 to 2372 degrees F)
Power supply	9V battery (one, installed)
Standards met	European Conformity (CE) marked; Underwriters Laboratory listed; International Electrotechnical Commission (IEC) safety standard 61010-1
Weight	320 g/11.3 oz.
Dimensions	198 x 90 x 40 mm/7.8 x 3.5 x 1.57 inches (H x W x D)

H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Multitesters (also called multimeters) are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multitesters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multitesters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages. Safety ratings are based on the International Electrotechnical Commission's (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.

BK Precision manufactures test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 1951, is headquartered in Yorba Linda, CA. It meets International Organization for Standardization (ISO) standard 9001:2008 and is compliant with Restriction of Hazardous Substances (RoHS) and waste electronic and electrical equipment (WEEE) directives.

What's in the Box?

• BK Precision 390A average-sensing digital multimeter
• (1) Set test leads
• K-type thermocouple probe
• USB data cable
• Software
• 9V battery (installed)
• Spare fuse
• Instructions

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Great for the hobbyist
By B. Gardner
The 390A is one of the best multimeters available for the price. Having all the standard features plus frequency measurement, capacitance measurement, and a Type-K thermocouple connection makes it useful in almost any situation. The auto-ranging feature is very handy and it also includes an infrared RS-232 communication feature for when you can't be next to the device you're testing. Comes with probe-type test leads and a Type-K thermocouple, though I would recommend getting the pincer-type test leads as well. Solid construction with durable easy-grip coating and back-mounted stand. Well worth the price.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Comparisons for Tuthill FR152 Fill-Rite Piston Style Fuel Transfer Hand Pump

Buy Tuthill FR152 Fill-Rite Piston Style Fuel Transfer Hand Pump

Tuthill FR152 Fill-Rite Piston Style Fuel Transfer Hand Pump Product Description:

• Vacuum breaker
• Bung adapter
• 3/4 inch outlet 8 feet hose and nozzle
• Telescoping suction pipe
• 15 pounds / 6.8 kgs

Product Description

Piston Hand Pump Series 5200 This compact, high flow, dual-action design delivers up to 20 GPM (76 LPM) per 100 strokes. Lightweight and portable, with a variety of options, these pumps meet a full range of applications. Ideal for gasoline, oil or a wide variety of approved liquids.

Customer Reviews

Most helpful customer reviews

2 of 2 people found the following review helpful.
Really pumped about this.
By Sueth Sayer
I've been looking all over for a way to transfer heating oil from my underground tank, down 6 feet or so, and tried a Harbor Freight rotary which did absolutely nothing. Also tried a few lever types to no avail. Didn't want to spend a ton on some kind of fancy electric pump, when I came across this baby. Dropped the hose down 7 feet, pumped a few times, ka-blooey, oil was gushing into my barrel at a good clip. Easy to operate, smooth action, no leaks, nice piece of work. Love it.

2 of 2 people found the following review helpful.
durable goods
By Ronald F. Erdmann
piston hand pump will be used in a remote location and will be transferring fuel.Have others and they have given no problems and receive rough treatment.

1 of 1 people found the following review helpful.
Piece of junk
By Deron Eunice
fuel washes the paint off of it, didn't even pump 200 gallons of fuel and it was leaking fuel, sucking air, and the paint is coming off.

See all 6 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Comparisons Tippmann Cyclone Feeder System for Custom 98, Alpha Black Elite and Project Salvo markers

Buy Tippmann Cyclone Feeder System for Custom 98, Alpha Black Elite and Project Salvo markers

Tippmann Cyclone Feeder System for Custom 98, Alpha Black Elite and Project Salvo markers Product Description:

• Air assisted loader system feeds paint into your marker at up to 15bps
• No batteries required
• The feeder sprocket is linked to the air system for synchronized ball feed
• Low profile 200 round hopper included
• Note: If being used on a Non-Platinum Series Custom 98 or Custom Pro marker with a response trigger, you will need an adapter kit, model T299003

Product Description

It doesn’t matter how fast your marker is if your feeder can’t keep up. That’s where the Cyclone Feed System upgrade kit comes in to play. This system is for the Alpha Black, Alpha Black Elite, Project Salvo, and the Tippmann 98 Line of markers.

Customer Reviews

Most helpful customer reviews

15 of 16 people found the following review helpful.
Great upgrade for your Custom 98
By Thomas Pedersen
This is a great upgrade. Once installed, it worked great! It was a bit of a hassle to install, mostly due to the fact that you have to replace the power tube around the valve. Realigning the valve in the new power tube takes some patience. I would recommend using some teflon tape when re-attaching the gas line to the valve to avoid leaks. Other than that its Da Bomb. Remember that if you have a response trigger, you need an adaptor kit so that you can have both upgrades working. It's around $20.

9 of 9 people found the following review helpful.
Great upgrade
By Donald Kobayashi
I am very satisfied with this hopper upgrade for my 98 Custom Pro. The gravity hopper it came with just could not keep up, or maybe it was bad paint that didn't like to feed properly, half the time I was pulling the trigger I got nothing but air, but after getting the Cyclone system, no ptoblems whatsoever. Easy to install, price was competitive with other hopper upgrades, and it looks very cool. The only downside is that it only works on this marker, so when I upgrade to another marker, this hopper stays on the Tippmann... oh well... no regrets here despite that.

15 of 17 people found the following review helpful.
Nice!
By tfunk2
This thing is cool, a speedy hopper that can run without batteries- thats what got me to buy it.The instructions suck, I ruined a valve and a gas line part before realizing how to do it. Thats the problem with Tippmann- their instructions are vague and give no detail on how to accomplish the tasks.Back to the cyclone, after the work was done and it was installed it evaluated it it based on the appearance. The hopper is very well designed, it fits a pod perfectly and the system's placement on the gun couldn't be better. It still enables you to access your sights and doesn't stick up (as many electronic halos and eggys do), The thing makes your gun look bad a#%, (like an a5). -with other modifications to the gun, I prefer mine over an a5 any day.The cyclone doesn't run on batteries (yes!), one less thing for you to worry about when you step onto the field.All in all, the cyclone provides excellent speed, great efficiency, sweet design, and a crap instruction manuel.- Buy it, but if your not a do-it-yourself person (like me), than have someone experienced install it!

See all 67 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Lomanco BIB-12 MILL Whirlybird Turbine Ventilator

Buy Lomanco BIB-12 MILL Whirlybird Turbine Ventilator

Lomanco BIB-12 MILL Whirlybird Turbine Ventilator Product Description:

• 12-inch whirlybird turbine ventilator ensures long life and no maintenance
• Reduces winter ice build-up and energy bills; withstands winds up to 147 MPH
• 21 air-foil curved vanes with rolled vane edges to deflect water
• Vari-pitch base adjusts to a 12/12 roof pitch
• Lifetime warranty

Customer Reviews

Most helpful customer reviews

8 of 8 people found the following review helpful.
Good product, good company.
By Robert L. Smith
I had two of the externally braced version of these installed on my roof in the early '80s. The shiny bare aluminum weathered to a nice dull light gray over the years and they spun quietly through about 30 years of Gulf Coast storms and hurricanes until the bearings failed recently. I called Lomanco with the code numbers on them and they had replacements delivered to my door free of charge. I was slightly disappointed that the new ones are smaller than the old ones. They are about the same diameter, but noticeably shorter, so I think they will be slightly more restrictive to airflow. Still, I am happy overall with my Lomanco Whirlybirds.

3 of 3 people found the following review helpful.
Lomanco Whirlybird Turbine Ventilator
By JayRay
Lomanco BIB-12 MILL Whirlybird Turbine Ventilator I was hoping this would be as good as they claim but it's not. They were easy to install but once they were in I realized that they were not nearly as smooth turning as my neighbors. I don't know what brand my neighbor has but they turn in even the lightest wind and mine just sit there. They spin when I push them and they don't seem to be binding at all but my neighbor said they were there when they moved in 8 years ago and they turn better than my brand new Lomanco.Like good bike wheels, its about the quality of the materials and how they're assembled.I'm going to find out what type they are and buy that brand.

13 of 18 people found the following review helpful.
Wrong item
By Lizzy
This is an excellent item and I have had them before so the actual product I give 5 stars too. However, I ordered this item specifically as it was a brown one to coordinate with my roof. I received a nasty looking galvanised one! Amazon did refund the money but not the shipping costs so all in all dissapointed. They should show images of what they are actually selling, not different items!

See all 9 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Get Cheap Tippmann Model 98 Paintball Marker

Buy Tippmann Model 98 Paintball Marker

Tippmann Model 98 Paintball Marker Product Description:

• Marker is crafted with an aluminum die-cast receiver
• Semi-automatic marker integrates high-performance with ergonomic design
• CVX valve delivers maximum output in varied conditions
• Lightweight, hyper-shot trigger system
• This item is not for sale in some specific zip codes

Product Description

What's Included with the 98 Custom Platinum Ultra Black Tippmann 98 Custom Ultra Basic Platinum Series Marker 8 1/2 inch Quick Thread stone honed high performance barrel Wrenches Oil Manual Squeegee Two Year Warranty from Tippmann Description of the 98 The 98 Custom Platinum is our entry level, fully customizable marker. The main feature is the ease of customizing the marker. Split Receiver Design, which provides easier access to internal components for simplified installation of grip upgrades and modifications. Secure Front Sight Spring and Trigger Pins, which makes the marker easier to service and reassemble. Easy-to-Remove Power Tube Design with self-sealing/locking gas line secures the valve in place and eliminates two bolts from previous design making maintaining the marker quicker and easier. Full Depth Pockets for ASA, which eliminates the need to loosen the ASA bolts when disassembling the marker. New Barrel Porting and a Matte Finish, which improves marker air efficiency and reduces reflective glare. Picatinny Rails, which makes adding a carry handle, scopes and other accessories a snap. Redesigned, Vertical Front Grip, which offers improved stability and added texture for a more secure feel. Redesigned Sling Mount End Cap, which allows players to easily attach a variety of different sling styles. Technical Information Model - Tippmann 98 Custom ps Caliber .68 Semi-Automatic 150+ Magazine Capacity Better Accuracy & Greater Distance Shoots up to 11 Balls Per Second Weight without tank 2.9lbs Effective Range 150+ Feet

Customer Reviews

Most helpful customer reviews

10 of 11 people found the following review helpful.
Good price, Good starter gun.
By Cherie Schmidt
You can upgrade the Model 98 much like the Custom 98. Very min. differences in the two guns. NOT 80.00 in differences. You can put a double trigger on it but it is not as easy to do (custom 98). It requires small frame changes. Otherwise everything is upgradeable. Free shipping makes it twice as nice. Call Tippmann for any questions they were very helpful in relating the differences. They more or less said it was a steal only because they are becoming a thing of the past the new partner is the Custom 98. These will not be available for long per Tippmann.

5 of 5 people found the following review helpful.
best of the best
By T DA MAN
clearly one of the best paintball guns on the market with its sleak design and its pinpoint acccuracy it is my favorite paintball gun ever i give this gun a two tumbs way up and five stars so i haope u enjoy your new Tippman 98 custom paintball gun like i did.

11 of 14 people found the following review helpful.
The best gun for a starter ever!!!
By Ted Fraisher
This is the best gun for a starter ever. It may be the old modle, but its a trippmann! What could be better. Compare to a spyder sonix or rodeo this gun is the best. At $90 this is a pro level gun at a starter price. I you have been playing for some time with a cheap starter gun, and a ready to move up to a more advanced player this ius how you can do it for cheap. You can even equip it with a 16" barrel and a cyclone feeding system to have a gun as good as an a-5 for at least $50-60 less then an actual a-5!! You can also get the double trigger upgrade for $15. At trippmann at this pricehas been unheard of untill a custom pro made this original 98 more obsolete. DON'T buy a 98 custom pro. Buy this and upgrade, you'll still come out cheaper.

See all 21 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Cheapest Curt Manufacturing 1340703 Custom Color Receiver

Buy Curt Manufacturing 1340703 Custom Color Receiver

Curt Manufacturing 1340703 Custom Color Receiver Product Description:

• 2" Receiver Tube opening
• Gross Trailer Weights (GTW) and Tongue Weights (TW) vary by application
• Never exceed vehicle weight rating
• Hitch Ball sold separately
• Limited Lifetime Warranty to original purchaser

Product Description

All CURT hitches feature WeatherTite construction, which prevents rusting from the inside out by sealing the main body of the hitch. The receiver tube has an open back end to allow for easy cleaning and for dirt and moisture to pass through and not get trapped as is common with other brands of hitches. All CURT hitches come with mounting hardware and installation instructions. CURT is the only hitch company in the industry that mechanically de-scales all of our hitches before applying a thick powder coat finish, which is baked on for a high-gloss, smooth surface. CURT trailer hitches are simply the most attractive, most durable and toughest hitch on the market. You won’t find better quality and value anywhere!

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
Easy install!
By MJParnel
This was easy to install, and is exactly as expected. Minor inconvenience of needing to remove the the spare for installation, but the hitch doesn't interfere with the spare once installed. Fortunately, I own the necessary tools for install. The only tool some people may not have is a torque wrench.

1 of 1 people found the following review helpful.
easy to install, looks good, seems to be working fine
By A. Taylor
short review on this one, not much to report really. It was easy to install in about a half hour and unlike some of the other SportTrac hitches, this one does not require you to remove the bumper bolts. I would highly suggest taking out the spare tire tho. Whether you are right-handed or left-handed, there is ONE BOLT on each side that is very difficult to get tightened. I'm right handed, so I had trouble with the left side bolt. I had a friend hold the torque wrench in place and used my foot to push on it to the right torque. Other than that one bolt, the install was super easy and I could have done it by myself.It looks good, and is mostly hidden from view.

1 of 1 people found the following review helpful.
Great Receiver and perfect fit!!
By Bill-Miami
I got it yesterday at my job and once I got home I installed it. Easy to install, I have a 2005 Ford Explorer Sport Trac Adrenalin, it took me about 30 minutes to install. I do recommend this product. Oh yeah fast delivery.

See all 11 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!